Intesis AC Interfaces
- Is my central controller compatible with Intesis solutions?
- I can't control my Hitachi Unit but I can read the Statuses.
- How does the external temperature sensor function work?
- Intesis interoperability with Mitsubishi Heavy Industries Super Link 2 central controllers
- Incompatibility with Samsung centralized controller with all protocols (KNX, BACnet, Modbus, etc.).
- How can I check if my wired remote control is compatible with Intesis solutions?
Intesis Protocol Translators
- Can the OCPP to Modbus gateway sample meter values from the charge point?
- The OCPP Scan function from Intesis MAPS is not detecting any charge point. What could be causing this?
- How to perform a Factory reset on the INMBSOCP0**0100 gateway
- Should I use an external power supply for the DALI bus when using the new 700 Series DALI gateways?
- What parameters must be enabled to use the Input Devices Local Management feature?
- A parameter of the device changes its value after the commissioning process.
Intesis Cloud Solutions
- How to switch the AC Cloud Control device "on" or "off" via a calendar action?
- Configured calendar actions are not displayed on the App phone or don't work as expected.
- How to perform a factory reset on a ACC / WMP Device
- Universal AC Cloud Control device no Binary input option shown in the WEB/ APP
- Which ports and IP addresses are used for AC Cloud connectivity?
- I cannot reset/recover my AC Cloud Control/Airconwithme password
Intesis Software & Tools
- How to change Values in MAPS with conversions?
- How to transfer KNX Group addresses from MAPS to ETS
- How to change Group addresses in MAPS
- How to use KNX extended addressing in MAPS (Invalid Sending Address)
- How to setup KNX Flags to update BACnet Values properly in MAPS
- How to update the FW of an MAPS configured Gateway when you are Offline?