This article will show you how to export the Group addresses from an Intesis MAPS Project to then Import them on ETS.
APPLICABLE PRODUCTS
All Intesis KNX Gateways that are configured via MAPS
PRE-REQUISITES
Intesis MAPS
ETS
IN THIS ARTICLE
Open your MAPS configuration and go to the Signals TAB (1) then select Export on the bottom right (2) select .CSV (3) and Press export (4). In the follow-up Window select the folder and set a name for the exported .CSV file.
Then go to ETS and open the Groupadress Panel (1) on that panel then right click (2) and select "Import Group Addresses"(3). On the follow-up Window select the previous exporter .CSV file
After that, the group addresses will be imported and shown.