In this article, how to restore the MAPS project password.
APPLICABLE PRODUCTS
All the gateway that configured via Intesis MAPS software.
PRE-REQUISITES
Installed Intesis MAPS.
IN THIS ARTICLE
There are three options;
1. The default password is "admin". If you have already changed it and you have the project, you can see the password in INTESIS MAPS under Configuration --> General--> Connection --> clicking to eye icon will make it visible to see the password.
2. You can connect with USB, you will not be prompted to enter a password.
3. You can reset the gateway to factory defaults. See: How to Factory Reset the Intesis Protocol Translator?
ADDITIONAL INFO