Ewon Flexy
- Can I recollect/retrieve an Ewon tag after a reboot of the Ewon?
- Record Wi-Fi Signal in a Tag on Flexy
- IO Server limitation - MODBUS TCP & OPCUA
- How to troubleshoot modem extension card issue?
- Publish Tags through the Ewon OPCUA Server
- Set viewON application as Ewon homepage
- How to connect the Ewon Flexy to multiple LAN networks?
- How and why to change the Flexy VCOM buffer size
- How to Add a Custom Certificate to the Ewon to GET / PUT HTTPS Request
- How much data can be stored with historical logging of an Ewon Flexy?
- How many slave devices an Ewon Flexy can poll
- What is the largest SD card size that the Flexy will support?
- What is the Ewon Flexy Tags limitation
- How to isolate truly bad Tags from the others ?
- Troubleshooting an Ewon Flexy's serial connection
- How do I wire the DI for Flexy 205?
- What is the average power consumption of the Ewon Cosy+ and Flexy.
- Enable/Disable Ewon Flexy WAN or VPN connection using a key switch
- EWON Flexy IO Server: Using Port 503 as Modbus-TCP Port
- How much will it cost me to stream KPI from a cellular based Ewon gateway?
- How to wake-up a cellular-based Ewon?
- How do I downgrade an Ewon firmware?
- What type of timestamps does the Ewon Flexy use?
- Which port(s) should I open in my firewall to allow connection to Talk2M?
- What is a PR firmware?
- Which models of the S5 family are compatible?
- How can I create a gateway between RSView (using Ethernet/IP) and my Allen-Bradley / Rockwell PLC (using the DF1 protocol)?
- How I can poll a Micro 8xx Rockwell PLC with my Flexy.
- I don’t know my SIM card specifications (APN, user, …).
- Ewon KPI Setup