djoneddd

  • 活动总数 18
  • 最后的活动
  • 成员加入日期
  • 正在关注 0 名用户
  • 关注者数 0 名用户
  • 投票数 1
  • 订阅数 7

活动概览

djoneddd 的最新活动

  • djoneddd 创建了一个帖子，

    Atlas2 and Ethertap network diagnostic

    1. 社区
    2. Anybus - Diagnostics

    Hi everyone, we have atlas2 and ethertap (100mbps) and the license for Ethernet/IP, Profinet and Modbusif we measurement of Profinet, we can see so much information like topology, detail error at r...

    • djoneddd
    • 2 个关注者
    • 1 条评论
    • 0 票

  • djoneddd 创建了一个帖子，

    ABC3090 - FATAL ERROR - PROFINET to MODBUS/RTU

    1. 社区
    2. Anybus - Gateways

    Hi Everyone, my customer have problem with ABC3090 it suddenly have fatal error it already 3x at the last week, after reboot from power it is going back normal. gateway works for 24h/7d for almost...

    • djoneddd
    • 2 个关注者
    • 1 条评论
    • 0 票

  • djoneddd 进行了评论，

    1. 社区
    2. Anybus - Diagnostics
    3. Sorting Profibus Nodes

    Hi Amir, Actually, we can add, delete or re-order position of node from "Network Manager"but for bar graph display only have option display base-on address or base-on level measurementif we delete ...

  • djoneddd 进行了评论，

    1. 社区
    2. Ewon - Flexy
    3. FLEXY 205 WITH MITSUBISHI QJ71E71-100

    Update: it works fine if I connect it from Q71E71-100we just need to crosscheck the assignment IP of module, network number and station numberthe default for MC port will be: UDP=5000/5001; TCP:500...

  • djoneddd 进行了评论，

    1. 社区
    2. Ewon - Flexy
    3. FLEXY 205 WITH MITSUBISHI QJ71E71-100

    Hi Franziska, Thank you for the link, i will try it next week on site, i hope it can work properlyi will update here with documentation if it works Best regards, Joned

  • djoneddd 进行了评论，

    1. 社区
    2. Anybus - Gateways
    3. ABC4091 - Siemens S7-300 [profibus] with S7-1200 [profinet]

    Hi ALK, Thank you for your recomendation,After i change the address, it's working properly now Best Regards, Joned

  • djoneddd 创建了一个帖子，

    ABC4091 - Siemens S7-300 [profibus] with S7-1200 [profinet]

    已回答
    1. 社区
    2. Anybus - Gateways

    Hi everyone, I have network Profinet [S7-1200] with Profibus [S7-300], so i use ABC4091 for exchange dataFor profinet side it works fine, i can send data and can monitored from IO diagnostic on ABC...

    • djoneddd
    • 2 个关注者
    • 2 条评论
    • 0 票

  • djoneddd 创建了一个帖子，

    FLEXY 205 WITH MITSUBISHI QJ71E71-100

    已完成
    1. 社区
    2. Ewon - Flexy

    Hi everyone, i want to pooling data from Mitsubishi Q170MSCPU [basically it was integrated cpu Q03UDCPU with motion cpu]  through QJ71E71-100 (ethernet module)But i can't found option for MC protoc...

    • djoneddd
    • 2 个关注者
    • 3 条评论
    • 0 票

  • djoneddd 进行了评论，

    1. 社区
    2. Anybus - Diagnostics
    3. Anybus Profihub With Fiber Optic

    Hi Ralf, Thank you for the feedback,Is that mean Profihub FO only works on base network profibus not profinet?So if the network already have FO from Profinet we can't use it right?Do you have exper...

  • djoneddd 创建了一个帖子，

    Anybus Profihub With Fiber Optic

    1. 社区
    2. Anybus - Diagnostics

    Hi everyone, can i use Profihub (with fiber optic) as network converter from Profibus DP to Fiber Optic Ring?for example the PLC as master connect to DP connector at profihub, and the fiber optic f...

    • djoneddd
    • 2 个关注者
    • 3 条评论
    • 0 票