Hugh Whitefur

  • Actividad total 94
  • Última actividad
  • Miembro desde
  • Siguiendo 0 usuarios
  • Lo siguen 4 usuarios
  • Votos 1
  • Suscripciones 62

Resumen de la actividad

Última actividad de Hugh Whitefur

  • Hugh Whitefur hizo un comentario,

    1. Comunidad
    2. Anybus
    3. PLC requirements for a Ethercat link

    Hi Manuel, The ABC4012 has an EtherCAT SubDevice/slave interface, so it connects to an EtherCAT MainDevice/master like a PLC. To connect to an EtherCAT drive, you would need a device with an EtherC...

  • Hugh Whitefur hizo un comentario,

    1. Comunidad
    2. Anybus - Gateways
    3. Modbus Client PLC to Profinet PLC via Gateway

    No, this wouldn't work as the ABC3213 has a PROFINET device (slave) interface. The Wago PLC would need to have the ABC3213 added as a module via its GSD file, and then the program would need to be ...

  • Hugh Whitefur hizo un comentario,

    1. Comunidad
    2. Anybus - Wireless
    3. Anybus Bolt II with microcontroller

    No, at this time there is no support for programmatic access to values like RSSI.

  • Hugh Whitefur hizo un comentario,

    Comentario oficial
    1. Comunidad
    2. Anybus - Gateways
    3. serial communication proble on Anybus ABC3090-A

    After troubleshooting with achraf in a ticket, we determined the issue came from the wiring for the serial connection, with Rx and Tx wires swapped. After changing this, communication worked as it ...

  • Hugh Whitefur hizo un comentario,

    1. Comunidad
    2. Ewon - Talk2M
    3. Connect eCatcher to PoweBI

    The M2Web API can provide most of this (status, description, and custom fields). The location shown for an Ewon is based on its public IP, so for Flexy devices you could send a script command to re...

  • Hugh Whitefur hizo un comentario,

    1. Comunidad
    2. Ewon - Talk2M
    3. Connect eCatcher to PoweBI

    Can you tell us a little more about your application? What kind of data would you like to bring into Power BI? For data you see in Ecatcher like the online status of your Ewons, I recommend looking...

  • Hugh Whitefur hizo un comentario,

    1. Comunidad
    2. Ewon - Cosy
    3. Issue when adding a new Cosy+

    Hi Daniele, I am having trouble replicating this behavior. When I use the Ewon name registration, I've seen three outcomes based on the scenario: There's a new Ewon entry in Ecatcher with no assoc...

  • Hugh Whitefur hizo un comentario,

    1. Comunidad
    2. Ewon - Cosy
    3. Issue when adding a new Cosy+

    Hi Daniele, How are you configuring new Ewons? Are you using an activation key from Ecatcher and running the setup wizards on the Ewon itself, or are you using a configuration file applied via USB/...

  • Hugh Whitefur hizo un comentario,

    1. Comunidad
    2. Ewon - Cosy
    3. Issue when adding a new Cosy+

    Every device does have a unique serial number. An entry in Ecatcher is linked to one specific serial number, however reusing the activation key from that entry on another device will replace the Ew...

  • Hugh Whitefur hizo un comentario,

    1. Comunidad
    2. Ewon - Cosy
    3. Issue when adding a new Cosy+

    You will need to re-run the Talk2m wizard on the original Cosy+ using either the activation key for its entry in Ecatcher (which is now connected to the new Cosy+), or using the activation key from...