Pierre
- Actividad total 10
- Última actividad
- Miembro desde
- Siguiendo 0 usuarios
- Lo siguen 0 usuarios
- Votos 0
- Suscripciones 2
Resumen de la actividad
Última actividad de Pierre-
Pierre hizo un comentario,
I had a tag with a typo, now it works. Thanks for your help!
-
Pierre creó una publicación,
Tags error when pooling data from an Allen Bradley PLC
I get errors when I am pooling data from an Allen Bradley PLC if I don't activate : disable tags error in general/global settings/advanced parameters. I don't understand the fonction of this parame...
-
Pierre hizo un comentario,
If no one can answer, can someone direct me to another service so that I can get an answer and resolve my problem?
-
Pierre hizo un comentario,
We are pooling data from a bacnet HVAC device on the wan side. Network topology: 1 - On Ewon power on, communication doesn’t work. ( see picture no 2 ) The Ewon seem to register is BACnet...
-
Pierre hizo un comentario,
Thanks ! it works fine. Like I said I am pooling data with the bacnet server from a device located on the WAN side. I set WANitfProt to 2 to allow WAN to LAN communication. It works fine for 2 days...
-
Pierre hizo un comentario,
Thanks ! What is the best way to write data coming from an ioserver to another ioserver ? Should I use script in BASIC IDE ?
-
Pierre hizo un comentario,
I have already done this on another project and the devices were on the LAN side, and it worked well, in this case the bacnet server is on the WAN side and the Siemens PLC is on the LAN side and it...
-
Pierre creó una publicación,
FLEXY205 ioserver LAN to WAN
I would like to exchange data between an HVAC controller that uses the Bacnet communication protocol on the WAN side and a Simens PLC on the LAN side, is this possible?