Red Lion Panel Meter Tech Notes
Red Lion Panel Meter Tech Notes
- Using PM50 for Cost Effective Lift Station and Water Tank Filling Application
- Configuring the PM50 as a Numeric Modbus Slave Display
- How to configure the setpoints of a PM50 panel meter
- PAX PAXCDC50 Profibus Configuration
- Locked out of Program PXU Controller!
- How to Setup a PXU for the First Time
- PAXC/PAXI: Counter C Does Not Equal A-B OR A+B
- How to convert from a legacy CUB5 to current version
- Configuring a PAXCDC30 DeviceNet card with an AB 1747-SDN Scanner Card
- Configuring the PAXCDC50 with Siemens Simatic Manager
- How to covert from a CUB4CL to current CUB5I
- How to covert from a legacy CUB4I unit to the current CUB5I
- How to upgrade the firmware on the PM50 panel meter
- ICM8 Configuration
- How to calibrate the input of a PAXD panel meter
- How to calibrate the input on a PAXS strain gauge panel meter.
- How to install a 4 wire RTD to the PXU control
- Correcting Erratic Counting
- How to connect a PXU process control to Crimson 2.1
- How to manually tune a PXU PID process control
- How to Setup the PXU Process Control as a Digital Potentiometer
- How to select an option card for the PAX series panel meter
- Scale Factor and Display Rounding
- Erratic Counting When Powering Old and New Style CUB5 Counters
- PXU Profile Control via Modbus
- Connecting PAX or CUB5/LD to a Slave Display
- Sinking and Sourcing Types of Inputs
- PXU - Producing an Output for 4 - 20ma
- How Calculate a Counter Scale Factor
- PXU: Configuring Heater Current Input Alarms