Komlan
- Total activity 69
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 29
Activity overview
Latest activity by Komlan-
Komlan commented,
Hi Raphael, Only the IO Process Data is shown in the main communication window of the PROFIBUS Master Simulator. Have you mapped all those 16 ADIs as Process Data in your host application? It may b...
-
Komlan created an article,
My PROFINET device loses the station name after a power cycle: what to do?
This article explains what may be causing the loss of your PROFINET station name after you restart your device. APPLICABLE PRODUCTSAny HMS PROFINET device PROBLEM DESCRIPTIONI assign the PROFINET ...
-
Komlan created an article,
What to do if you get the error "Node version incompatible" when importing a node configuration file into the new serial Anybus Communicator
This article describes the steps to follow if you get a "Node version incompatible" error when attempting to import an existing node configuration file into your serial ABC Anybus Communicator. APP...
-
Komlan created an article,
Fix the "Installation was aborted with errors" error when installing the CM CANopen HSP in TIA Portal
This article explains what to do to solve the "Installation was aborted with errors" error when trying to install the CM CANopen HSP in TIA Portal. APPLICABLE PRODUCTSCM CANopen (021620-B) PRE-REQU...
-
Komlan created an article,
How to solve the FTP error "431 directory does not exist" for Ethernet based Anybus CompactComs
This article explains how to mitigate the FTP error "431 directory does not exist" for your Ethernet based Anybus CompactCom. APPLICABLE PRODUCTSAll Ethernet based Anybus CompactCom products. ISSUE...
-
Komlan created an article,
How to set Network Configuration Parameters of an Anybus CompactCom 40 with the DIP Switches
This articles provides a brief description on how network configuration parameters can be set in an Anybus CompactCom 40 using the available DIP switches. APPLICABLE PRODUCTS All Anybus Compact...
-
Komlan created an article,
How to Solve the "SupportedDelayMeasurements" Error in my Profinet GSD File?
This article explains what to do if you are getting the "SupportedDelayMeasurements" error, upon importing the GSD you have generated with our GSD Generator Tool. APPLICABLE PRODUCTS Anybus Com...
-
Komlan commented,
Hi Monesh, No, RMII is not a requirement for communication between the ABCC40 and the host. If the communication interface you would like to use between your host and the ABCC40 is SPI, then you si...
-
Komlan created an article,
How to enable Initial Record Data in an Anybus CompactCom PROFINET
This article provides an example on how you can add an initial Record Data to your Anybus CompactCom PROFINET implementation. APPLICABLE PRODUCTSABCC30 PROFINETABCC40 PROFINET PRE-REQUISITESAny Any...
-
Komlan commented,
Hello, The reception trigger byte and the transaction status byte are both triggered by a change in the transaction, however, as you pointed out, they don't provide any information on the specific ...