Mert Kavaf
- Total activity 61
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 3
- Subscriptions 31
Articles
Recent activity by Mert Kavaf-
How To Restore Intesis MAPS project password
In this article, how to restore the MAPS project password. APPLICABLE PRODUCTS All the gateway that configured via Intesis MAPS software. PRE-REQUISITES Installed Intesis MAPS. IN THIS ...
-
Can't establish VPN Connection to PLC with TIA Portal
This article explains how to solve the issue when there is an Ecatcher connection without a problem, but TIA portal can't reach the PLC. APPLICABLE PRODUCTS Ewon Cosy+ / Cosy 131 Ewon Fl...
-
I can't control my Hitachi Unit but I can read the status signals.
In this article, it is explained how to configure the Hitachi Bus to be able to control the unit. APPLICABLE PRODUCTS INKNXHIT001A000PROBLEMIt is not possible to send any command from KNX to Air-t...
-
How To create KNX Logging with ETS 5/6?
This article will explain what ETS 5/6 is and how to create KNX logging with it. PRE-REQUISITES To have ETS 5 or 6 installed and physical connection to the KNX bus with KNX-PC Interface. What...
-
Which ports and IP addresses are used for AC Cloud connectivity?
In this article, you can find the ports and IP addresses that AC Cloud uses. APPLICABLE PRODUCTS Intesis AC Cloud Control: INWFIDAI001I000, INWFIDAI001R100, INWFIFGL001I000, INWFIFGL001R100, IN...
-
How can I resolve a UUID error on CAN@net NT devices?
This article explains how to resolve the UUID error on CAN@net NT devices. APPLICABLE PRODUCTS CAN@net NT 100/200/420 QUESTION How can I resolve a UUID error on CAN@net NT devices when using tw...
-
Is it possible to use VCI V4 with older USB-to-CAN versions?
In this article, it is explained if it is possible to use VCI V4 with older than USB-to-CAN V2 compact. APPLICABLE PRODUCTS USB-to-CAN compact V1.5 ISSUE / QUESTION Is it possible to use VCI ...
-
How to reach the Intesis Gateway via IP after enabling DHCP?
In this article, it is explained how to reach the Intesis gateway if it is no longer reachable after the initial Setup when DHCP was activated without a DHCP Server on the Network. APPLICABLE PR...
-
ETS download failed on Intesis KNX gateway
This article explains what to do if the KNX gateway doesn't respond during ETS program download. APPLICABLE PRODUCTS Intesis 1 to 1 KNX AC Interfaces: INKNXACA001I000, INKNXACA016I000, INKNXACA064...
-
How to add the Indoor Units to a Intesis Mitsubishi Electric City Multi Systems Gateway
In this article, it will be explained how to configure the Indoor Units for the Mitsubishi Electric City Multi Systems Gateway. APPLICABLE PRODUCTS Multi-Unit Gateways (INKNXMIT015C000, INKNX...