Kyle Reynolds
- Actividad total 664
- Última actividad
- Miembro desde
- Siguiendo 0 usuarios
- Lo siguen 3 usuarios
- Votos 17
- Suscripciones 180
Comentarios
Actividad reciente de Kyle Reynolds-
Hi Jiott, You need to use the PLC's IP address and configure "ethernet devices' driver (AB-ETH1). There are step-by-step directions for common PLCs in the PLC area on ewon.biz:https://websupport.ew...
-
OK, but if I understand you correctly, the units work fine with eBuddy running on a different computer?
-
What version of eBuddy is he running? (Help > About) He should probably re-install eBuddy on his computer. Make sure it is the latest version. https://websupport.ewon.biz/support/product/download-z...
-
That's really strange. I haven't seen this. I think I understand what you were saying about entering the serial number now. When you highlight the device and click "Set IP" normally it enters the s...
-
Have you made sure that the OPC UA client is logging in with an eWON user for which the right "Force Outputs" has been granted?
-
Hi Samir, In order to connect the 2 remote networks securely over the public internet, you will need to use a VPN. You can use eCatcher or another VPN, but we can only support our own VPN. We can't...
-
Hi Samir, I need more information on the networks involved. Which devices are on the same network and which are on separate networks. The drawings show the Flexy and PLC on one network connected to...
-
Great! Glad it's working for you now. It can be easy to overlook in the manual, but now it will be on the discussion board. Thank you, Kyle
-
Here is a link to docs: https://websupport.ewon.biz/sites/default/files/aug-0064-00-en-opc-ua-server.pdf I found this example for Kepware v5.2: image558Ã841 128 KB You could also publish modbus T...
-
This depends on how your network is setup. I assume you must be connecting to the Flexy through the VPN currently. If you connect locally you won't need the VPN and eCatcher. Is the Flexy on the sa...