Kyle Reynolds
- Actividad total 669
- Última actividad
- Miembro desde
- Siguiendo 0 usuarios
- Lo siguen 3 usuarios
- Votos 17
- Suscripciones 180
Comentarios
Actividad reciente de Kyle Reynolds-
Did you tell the flexy which group of tags to publish? image723Ã447 58.1 KB
-
You need to make sure that the authentication settings are matching up in both the Flexy and the Kepware software. Something is not set up properly. Generally we don't recommend using anonymous co...
-
Have you checked all of the documentation for the OPC UA server? I am not very familiar with it, but it seems there is some kind of configuration missing on that side. You said the connection is go...
-
Make sure the OPC UA client is logging in with an eWON user for which the right "Force Outputs" has been granted. image655Ã683 31.9 KB
-
Where (on what network) is the OPC UA Server located? Can you ping the ewon 192.168.3.5 or connect to port 4841 from the network (nc -v 192.168.3.5 4841)? What type of authentication are you using?...
-
Please follow these instructions: DHCP Server on LAN Example: LANDHCPSEnable:1 [1=Enable, 0=Disable (default)] LANDHCPSStartIP:192.168.120.20 [Start address of DHCP pool] LANDHCPSEndIP:192.168...
-
These settings can also be found in the UI here: In Setup System Communication Networking Routing Natltf = 2 (This sets "NAT and TF on WAN') VPNRedirect = 0 (Allows traffic outside the VPN tunn...
-
If you want to give devices on the LAN internet access you will have to change some security settings and make sure they have the eWON's address set as their gateway. Go to Setup System Storage ...
-
Had a customer with verizon using wyleslte.gw7.vzwentp
-
Check out this link and let me know if it helps: Create a dynamic link in Javascript to a LAN device through M2Web