Kyle Reynolds
- Actividad total 669
- Última actividad
- Miembro desde
- Siguiendo 0 usuarios
- Lo siguen 3 usuarios
- Votos 17
- Suscripciones 180
Resumen de la actividad
Última actividad de Kyle Reynolds-
Kyle Reynolds hizo un comentario,
The WAN and LAN subnets do not overlap, but your gateway is not in the same subnet as the Flexy.
-
Kyle Reynolds hizo un comentario,
Hi Yana, I created a support request for you at support.hms-networks.com since we will need to discuss the Talk2M account and users, and this is a public forum. Someone should be reaching out to y...
-
Kyle Reynolds hizo un comentario,
I just wanted to update this post with the solution. What we found was that the data exchange was using the Talk2M API. Because this is a Talk2m Light account, when the data limit was reached, the ...
-
Kyle Reynolds hizo un comentario,
Hi Jaime, I'm probably not the best person to answer this, but I am not aware of any plans to release a MacOS version of Ecatcher. We do have a new Ewon Cloud platform that is more web based, and ...
-
Kyle Reynolds hizo un comentario,
Yes, as long as you have a cellular modem extension card and a cellular plan with SMS support, the Flexy can send SMS directly, without the relay service.
-
Kyle Reynolds hizo un comentario,
Excellent - thank you for the update!
-
Kyle Reynolds hizo un comentario,
> Do I need to set up the FTP configuration in the eWon itself? No, you shouldn't need to. The default should be working. > (address, user, password), and should I be using passive or active mode? ...
-
Kyle Reynolds hizo un comentario,
Are you using the 'adm' user? Please make sure to use the 'adm' user and password.
-
Kyle Reynolds hizo un comentario,
You probably overwrote the password hash and will have to reset the password. I would advise a Level 1 reset. How to Perform a Reset Level 1 and Level 2 on an Ewon Device – HMS Support Portal Keep...
-
Kyle Reynolds hizo un comentario,
Can you provide some more details on what you are trying to accomplish? To reach a LAN device from the WAN, you can use NAT 1:1 as shown above or Proxy/Port Forwarding: Use Port Forwarding/Proxy r...