gianmattia
- Actividad total 12
- Última actividad
- Miembro desde
- Siguiendo 0 usuarios
- Lo siguen 0 usuarios
- Votos 3
- Suscripciones 2
Resumen de la actividad
Última actividad de gianmattia-
gianmattia hizo un comentario,
Ok, i sent it
-
gianmattia creó una publicación,
Read device error
RespondidaHello, i have a broken icla n065 stepper motor and i connect on the USB to can V2. How can read the error register? When it boots it sends this message but I can't identify it ID: BC Data: 00 60 ...
-
gianmattia hizo un comentario,
Thanks i solvet It used lss Messanger, but First i send nmt message to the device Id: 0x000 data: 80 7F (7f Is default node 127)
-
gianmattia hizo un comentario,
Ok, i can send this LSS message with canAnalyser3 or i need other software? thanks for all the help
-
gianmattia hizo un comentario,
Hello, yes i installed this ICLA version on Windows 10 and i have the oldest on windows xp. I need only a solution to write in the EEPROM of ICLA stepper motor the "ID node". If is compatible the P...
-
gianmattia hizo un comentario,
I see this brand new interfacce, in the old icla CCT software Is mentionated but the old Windows xp driver and the old can open master api worked fine with the new hardware? The model i see Is pcan...
-
gianmattia creó una publicación,
usb to can V2 for program old ICLA stepper motor
RespondidaHello I Need to program the ID node on old stepper motor "ICLA N065" with the new ixxat "usb to can V2" interface. For programming this stepper motor at the time i use the software "ICLA-CCT" on wi...