tedsch
- Actividad total 18
- Última actividad
- Miembro desde
- Siguiendo 0 usuarios
- Lo siguen 0 usuarios
- Votos 0
- Suscripciones 5
Comentarios
Actividad reciente de tedsch-
/user_avatar/forum.hms-networks.com/jcadorette/40/502_2.png https://forum.hms-networks.com/t/can-two-flexys-communicate-through-a-vpn-to-each-other/717 /c/ewon-support/eFive-remote-net/21 ...
-
The idle time out has been changed.
-
Anything in the real time logs? They would show the step by step of the mqtt connection since the logging is turned on.
-
Can you check the basics? When does the CA.crt expire and is it still on the device? Is the device still setup on the IOT Hub?
-
Nice!!! Other things to watch out for, Any commas or semi colons in the tag description will mess up the export function from the excel sheet. If I am having issues with an import then I will take...
-
Check the log files to make sure there are no errors on import. Also does the tag generator have all the columns that the Flexy has? There were new columns added with firmware 13 and looks like f...
-
As Tim as mentioned you have to be a bit careful with the tag generator. There are some columns that were added depending on the firmware version of the Flexy unit. Referencing your issue with the...
-
Thanks for the offer but it is not needed. I have copies of the tag sheet for each firmware. Learned the hard way that I needed one for each firmware.
-
Did you look in the real time events> 1559540491 308454115 5 68 [server-device] Inactivity timeout ("ping-exit), exiting 1559540491 308454203 5 69 /opt/ewon/bin/openvpn/ov...
-
I just noticed you did not say anything about being able to use RS232 for the connection. Why is that? Also can the FLA3301 card do both full and half duplex?