MacsEngineer
- Actividad total 15
- Última actividad
- Miembro desde
- Siguiendo 0 usuarios
- Lo siguen 0 usuarios
- Votos 0
- Suscripciones 6
Resumen de la actividad
Última actividad de MacsEngineer-
MacsEngineer hizo un comentario,
I'd also like to know how to do this if anyone has some tip I have a ticket open with support and they are looking into it, but currently it seems like it will only work with the 4G enabled Netbi...
-
MacsEngineer hizo un comentario,
You can utilize some predefined scripts are there any instructions/guides for using the scripts? I found the options to add them, just don't know how to set them up
-
MacsEngineer creó una publicación,
Activating the relay on loss of network connection
We are having intermittent connection issues with a few of our Netbiters that are connected to 4G routers, we know the issue is being caused by a short drop in the 4G network and we are looking at ...
-
MacsEngineer creó una publicación,
Maximum number of Netbiters assigned to a single project?
We have a client who currently has 10 Netbiters in operation, all assigned to the same project, and potentially looking at adding several more at some point. Is there a limit to how many Netbiters ...
-
MacsEngineer creó una publicación,
Do 4G sim cards require a static IP for remote access?
RespondidaWe have a standard EC310 Netbiter connected to a 4G router; the current SIM card in the router needs replacing and we have been asked if we require a static IP for the new SIM. Does the SIM require...
-
MacsEngineer creó una publicación,
Unable to add more visualisation parameters.
Hi, I am setting up a new profile for one of out sites and need to add a few more visualisation parameters, the issue is I am getting a message that we are at the maximum of 128, but across the log...
-
MacsEngineer creó una publicación,
Confirming Firmware Version is up-to-date
I am checking our Netbiters to make sure they are all on the current firmware version In the Firmware tab, is the version number shown the firmware version on the Netbiter itself? All our units sho...
-
MacsEngineer hizo un comentario,
Hi Robert Thanks for the reply. I set up a new dashboard with just 2 buttons assigned to the parameter, and we are still getting the same issue. Would I potentially have to remove our custom images...
-
MacsEngineer creó una publicación,
Commands from buttons on the dashboard will not register
We use buttons on a dashboard to control the operation of automatic bollards, I am trying to set up a new Netbiter and the dashboards and am having trouble with the buttons not sending the commands...