Siobhan Chapman
- Total activity 56
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 3
- Subscriptions 31
Activity overview
Latest activity by Siobhan Chapman-
Siobhan Chapman commented,
Silence time is only applied to the messages sent by the Communicator CAN on the CAN bus, it causes the CAN transceiver in the Communicator CAN to insert a pause between frames that it is transmitt...
-
Siobhan Chapman commented,
Hi You do not say how the CAN consume transactions are configured - have you set up a single transaction to check for one CAN-ID or do you have multiple CAN-IDs in one consume transaction? Have you...
-
Siobhan Chapman commented,
Hi The most likely cause for this message is that the PLC is in Idle state. Please confirm the state of the PLC. The Home page of the Communicator will also reflect the status of the PLC as seen by...
-
Siobhan Chapman commented,
Official comment Hi Randy Yes, you are correct, the two pairs of ports are on two separate simple switches to allow daisy-chaining of the gateway into an existing network. Each pair of ports (one for Modbus TCP and...
-
Siobhan Chapman commented,
Official comment Please open a support ticket and provide the details of your Talk2m account - this will need to be corrected by the Ewon Talk2m admin team. Thanks
-
Siobhan Chapman commented,
On checking the Parker MD4 manual it says: SAE J1939 and Generic CAN protocols are also supported on the CAN buses and gives the possibility to interface to 3rd party units. This is therefore not...
-
Siobhan Chapman commented,
Hi Josh Ah - it was I who reversed the functionality. Thanks for the extended explanation. So, your first choice was correct, the AB9004 has the functions required - controller to the VFD using Mod...
-
Siobhan Chapman commented,
Can you tell us the part number of the Anybus gateway you are using? This will help us to give the correct advice. For more specific support, and the ability to share your configuration with the su...
-
Siobhan Chapman commented,
Official comment Hi I believe you have the functionality reversed here - if the Parker MD4 supports CANopen or J1939 the you are looking for a gateway that can control a device using one of those two protocols. The...
-
Siobhan Chapman commented,
Official comment Hi The model of Flexy that you have is not capable of connection to the Internet without a WAN card FLX3101_00 (or a Wi-Fi or Modem card). https://www.hms-networks.com/p/flx3101-00-ewon-flexy-exten...