ngilbert
- Total activity 8
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 1
Activity overview
Latest activity by ngilbert-
ngilbert commented,
ok when at the facility with the ewon, I can connect to the plc using ecatcher over wifi and a wired connection, but I can't connect from our other location so I am thinking it's an issue on our end.
-
ngilbert commented,
I've set the gateway, disabled plug n' route, can now ping the plc, but software still will not connect
-
ngilbert commented,
Does the subnet mask of the fanuc need to match the LAN Subnet Mask of the eWon?
-
ngilbert commented,
Changed the setting on my ewon cozy and set the gateway ip on my PLC to the ewon LAN IP, I can no longer ping the PLC when connected and still cannot go online with the software
-
ngilbert commented,
Ok I am just getting in for the day. I will try this and get back with you. Thanks
-
ngilbert commented,
The hardware will not connect, I was just curiours if anyone had this issue with the Fanuc or Proficy before. I have another eWon at the same facility connected to Allen Bradley PLC and I have had ...
-
ngilbert created a post,
eWON GE Fanuc - Proficy
Have a new eWon online at another facility connected to a GE Fanuc PLC. I am trying to use Proficy Machine Edition to get online with the program remotely. I have the eWon online and I am connected...