Zach Farmer
- Total activity 42
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 14
Comments
Recent activity by Zach Farmer-
Hi mark, Can you look at the ewon's configuration page when you are connected and check the hardware side to see if the device is set to 192.168.1.160? Also check the properties tab in eCatcher for...
-
We don't have tutorials, but there are examples located on this page. https://developer.ewon.biz/content/basic-1 We also have a reference guide that discusses the synax and gives example code. ...
-
Hi, If you go to the account tab in eCatcher you can choose report and it will have the monthly consumption reports that list the number of SMS that have been sent. The Flexy can show when an alarm...
-
You can have the Flexy read an incoming sms by writing a script in the BASIC IDE. Here is an example we have. https://developer.ewon.biz/content/sms-reception-ewon
-
Hi Bill, Do these SIM card that have this plan have an online management of the account that you can add credit to or is text messages that only way to make a payment for the SIM card? eCatcher doe...
-
Hi Bill, Section 7.2 of the flexy documnet talks about the parts of the BASIC IDE. hmsnetworks.blob.core.windows.net rg-0008-00-en-flexy-family.pdf 629.03 KB ...
-
The cosy is not assigning an IP and DNS to your laptop so you will have to set those. The IP address but be in the Cosy's LAN subnet and the DNS has to be valid such as 8.8.8.8 and 8.8.4.4
-
Are you able to ping the cosy's LAN IP from your laptop. Can you also go tot he comcfg file and comfirm the settings have been changed and after that reboot the cosy and see if you can get internet...
-
You would need to get an additional router. For changing the DHCP range this would only work if your parent network uses a DCHP server and does not assign the IP address to each device. This would ...
-
If the parent network is what your using for your WAN connection you will be getting a subnet clash so the cosy will not be able to be setup correctly. You should be able to see somethign along tha...