Skip to main content

EDS file for Anybus AB 7007

Comments

13 comments

  • anonqpihgtva

    Thanks. I will ask the vendor

    0
  • Kyle Reynolds

    The EDS and serial number are on this sticker:

    0
  • anonqpihgtva

    Please see attached photo.

    0
  • Kyle Reynolds

    Thank you!

    Here is the link to the EDS for the AB7007, EIP to ModbusTCP:

    Hi, The EDS file can be downloaded here: //hms-networks-s3.s3.amazonaws.com/original/2X/3/30df63e25cc209c14dd2e1d4de3fb652dcc01313.zip (7.3 KB) Regards, Deryck

     

     

     

     

    0
  • anonqpihgtva

    Thanks

    0
  • anonqpihgtva

    Kyle,

    Which EDS? The one I have highlighted?

    0
  • Kyle Reynolds

    005A000C004D0300.EDS to be used with Anybus Configuration Manager version 4.3.1.1 or later

    Make sure you are using the latest version of ABCM.

    0
  • anonqpihgtva

    Now I am really confused. I registered that file in Logix Studio 5000 and it is still not recognized. And what is ABCM?

    The vendor set up the device I just need to send data to it from our PLC.

    0
  • Kyle Reynolds

    Use the EDS Install Tool with 005A000C004D0300.EDS.

    ABCM is Anybus Configuration Manager. I am telling you to use the latest version and provided a link above.

    Then you will go to "Add Module" under "Ethernet" and you will find the AB7007. Make sure you enter the correct I/O info.

    0
  • anonqpihgtva

    Kyle,

    If I understand correctly I need install the ABCM software and use it to configure the Anybus module then I will be able to add the hardware to the PLC. Right?

    0
  • Kyle Reynolds

    You can add the Anybus to your project at any time, but you will probably want to wait until you know the Input and Output sizes.

    You will need to use the ABCM software to configure the Anybus Communicator.

    Make sure to set the Fieldbus type to "Ethernet/IP & Modbus-TCP':

    image

    When you finish your config, make sure to connect and download it to the Anybus, and check the I/O sizes. Any easy way is to use the Subnet monitor. Right click Subnetwork > Subnetwork monitor:

    image

    Let me know if you have any questions.

    Kyle

    0
  • Mikael Mårtenson

    Topic closed due to inactivity.

    0

Please sign in to leave a comment.