Kevin Annis
- 活动总数 105
- 最后的活动
- 成员加入日期
- 正在关注 0 名用户
- 关注者数 0 名用户
- 投票数 0
- 订阅数 39
活动概览
Kevin Annis 的最新活动-
Kevin Annis 进行了评论,
Hello, It will be dependent upon what the protocol that the Vibration Sensor uses. If the protocol used by the Sensor is supported by the Flexy, then it should work. Do you have more information on...
-
Kevin Annis 创建了一篇文章,
如何去修复X-gateway上载/下载配置时出现的超时错误(timeout error)
本文介绍了在使用Anybus Configuration Manager下载配置到X-Gateway时发生的超时错误应该如何修复。 适用产品 Anybus X-Gateway (ABXXXX) Anybus X-Gateway Configuration Manger 修复方法:当错误发生时将网关重新上电 确保网关已经和配置软件正确连接。 点击上载或者下载快捷...
-
Kevin Annis 进行了评论,
We do have 4G Cosy NA and Flexy 4G NA devices that utilize the rest of GSM networks such as AT&T. As stated before, that is something to discuss with your distributor and/or sales team.
-
Kevin Annis 进行了评论,
Hello, For Verizon? Unfortunately no. The FLB3203 and Flexy line are the only devices that can utilize Verizon. -Kevin
-
Kevin Annis 进行了评论,
Hello, The component could be on back order. Unfortunately, i do not handle stock or availability. You will need to consult with the distributor, and/or our sales team.
-
Kevin Annis 进行了评论,
Hello, I need the backup with support files. This can be done by connecting to the Cosy using eBuddy. The files you sent do not contain the information that I need.
-
Kevin Annis 进行了评论,
Hello, You can still connect the Cosy via Ethernet to a network. This uses the WAN port on the Cosy 131, instead of the cellular modem. You will need to connect the Cosy, Via ethernet, to a network...
-
Kevin Annis 进行了评论,
Hello, I would log in to the unit, and manually go through the Wizards. If you are still getting a failure on the Talk2m Wizard, then supply a backup with support files. I can review the device to ...
-
Kevin Annis 进行了评论,
Hello, I checked the purchase history of the device. It looks like this was sold to a distributor back in 2017. Who did you purchase these devices from? Were they from a distributor, or resale?
-
Kevin Annis 进行了评论,
Hello, Yes. You can purchase Verizon router to provide Internet to the device via Ethernet. There are no configurations that is required beyond selecting Ethernet in the Internet Wizard.