Kyle Reynolds
- 活动总数 665
- 最后的活动
- 成员加入日期
- 正在关注 0 名用户
- 关注者数 3 名用户
- 投票数 17
- 订阅数 180
评论
Kyle Reynolds 最近的活动-
OK great. I'll post a link to driver here in case anyone else needs it: https://hms365-my.sharepoint.com/:u:/g/personal/kre_hms_se/EeWoyZ2NK2pPop92YxaJ-dMBMdsLGERSdJxmY_S_U6XaRA?e=szLapQ
-
Hi Stefan, I've created a case for you with our IXXAT engineers in Germany. There are some known issues with certain newer PC hardware working with the older USB-to-CAN adapters. I would recommend ...
-
Do you have VCI3 also installed? It can cause Windows 10 PCs with secure boot enabled to crash. I would recommend uninstalling all versions of VCI and doing a clean install. Also, any 3rd party ant...
-
Hi Anders, I am escalating your case over to our IXXAT team in the EU, because it looks like they are local for you and will be best able to help with this issue. You should be getting an email fro...
-
Download here
-
You would need a ControlNet scanner to pull data from the IO, which unfortunately, we don't offer.
-
Are you aware that you are using the Eth/IP Scanner device (master) instead of the Eth/IP Adapter (slave)? What Controlnet devices are you connecting to? AB7673-F is typically used to map Eth/IP sl...
-
You are going to want the Ethernet/IP Adapter (slave) in order to map the IO to an EIP controller. See the AB7834. But, if you are in Australia as your IP shows, I would recommend also opening a ca...
-
You are receiving an error code from your slave device indicating an illegal data address. Please check the address with the slave's manual. If you have the manual, please share it and I will take...
-
Thank you for the manual. According to the manual, the error you are getting is: Checksum error in the data range And the remedy is: Perform service init How to "perform service init" isn't explain...