Kyle Reynolds
- 活动总数 665
- 最后的活动
- 成员加入日期
- 正在关注 0 名用户
- 关注者数 3 名用户
- 投票数 17
- 订阅数 180
评论
Kyle Reynolds 最近的活动-
I think they should be compatible if you have the vcilva.dll file in the same directory as the .exe. Let me know if you have any trouble.
-
And just to be clear: I do not know if the PVP7 will support this type of setup and there is a good chance that they won't. I have never seen this done before and from what I know about them, they ...
-
@ibuckley, This depends entirely on the HMI in question. Is it using a protocol like Modbus, something proprietary and complicated, or is it just using simple generic serial communication? The tag/...
-
Thank you Rob.
-
I misunderstood the original question and thought you were connecting the HMI as a slave to the serial master. In this case it sounds like you are using the HMI as the master on the fieldbus side. ...
-
The EDS and serial number are on this sticker: image587Ã814 402 KB
-
You can add the Anybus to your project at any time, but you will probably want to wait until you know the Input and Output sizes. You will need to use the ABCM software to configure the Anybus Comm...
-
Use the EDS Install Tool with 005A000C004D0300.EDS. ABCM is Anybus Configuration Manager. I am telling you to use the latest version and provided a link above. Then you will go to "Add Module" unde...
-
005A000C004D0300.EDS to be used with Anybus Configuration Manager version 4.3.1.1 or later Make sure you are using the latest version of ABCM.
-
Great! Let me know if you have any other questions. Kyle