Kyle Reynolds
- 活动总数 665
- 最后的活动
- 成员加入日期
- 正在关注 0 名用户
- 关注者数 3 名用户
- 投票数 17
- 订阅数 180
评论
Kyle Reynolds 最近的活动-
That is correct, but you must be using the pre-release version 6.4 of eCatcher.
-
How is this going? I did come across this forum where there is a lot of information involving the Kuka robot and WorkVisual. This guy had the exact same error as you and was able to resolve: https:...
-
I am not familiar with WorkVisual, but I am assuming that it is an EtherCAT configuration tool, like EC Engineer or TwinCAT. It just doesn't have the option to scan the PDO. Do you have any more in...
-
Buba: But it seems that there is still a connection problem somehow. Can you describe the problem in detail? Buba: I have heard that maybe we need a extra software from Anybus that allo...
-
Hi @Sandi, Thanks for the info. We don't have a device designed specifically for XANBUS and I don't have experience with it personally. That said, I can research this more because it may work over ...
-
Hi @Sandi, I did find a document which explains all of the Modbus commands supported by a Conext XW and Combox. I'm not sure if they include the AGS commands. The device looks like a slave device. ...
-
Sorry for the delay in getting back to you. I have gone through the manuals and I'm still unsure if the AB7315 will work. This would be pretty easy if we could just use serial or ethernet to interf...
-
This might be possible with the AB7003 using Modbus. Is the device using serial or ethernet? Are you able to send us the user manual for the device and the CAN controller? Kyle
-
Please try this: Go into the COMcfg (Setup > System > Storage > Edit COM cfg) and change the following settings: VPNAlive = 30 EthDns1 = 208.67.222.222 EthDns2 = 8.8.8.8 Then go into Edit SYSTEM co...
-
If it comes back up, can you also change EthDnsAuto to 0? If it keeps happening after that, I think you should run the VPN/Talk2m wizard again.