Kyle Reynolds
- 活动总数 665
- 最后的活动
- 成员加入日期
- 正在关注 0 名用户
- 关注者数 3 名用户
- 投票数 17
- 订阅数 180
评论
Kyle Reynolds 最近的活动-
I don't think this is possible with the Cosy+, but you can try to force UDP and set to VPN servers manually by setting: VPNProto=0 (default setting) VPNPortOut=1194 (default setting) VPNSrvAddrMod...
-
The "trust issue" error typically indicates packet inspection.
-
It may be that the bytes need to be reversed. PROFINET is big endian and Ethernet/IP is small endian, for example.
-
Hi Howard, I found another case where another customer spent a lot of time trying to get this work but was unsuccessful. Essentially, this is what they found: > The Anybus Gateway was an HMS-EN2P...
-
You may want to post on the Ewon Developers Forum which is managed by the Ewon developers: Ewon Technical Forum We have to forward this information to them, which we have already done. The Ewon de...
-
Hi Howard, You will need to contact the supplier or manufacturer of the device. If the diagnostics are part of the cyclic data, they need to provide a correct GSD file that allows you to select a m...
-
I'm not sure why it won't let you enable the alarms. I will escalate the case to the Anybus engineers and see if they can figure out why.
-
You can download the GSD file for PROFIBUS here: https://hmsnetworks.blob.core.windows.net/nlw/docs/default-source/products/anybus/configuration-files/hms-gsd-abx-pdps.zip
-
This video has some information about reading the Diagnostics: https://youtu.be/it8e3Sd5yJA
-
Also make sure all the alarms are enabled under parameter assignment: