Pete
- 活动总数 10
- 最后的活动
- 成员加入日期
- 正在关注 0 名用户
- 关注者数 0 名用户
- 投票数 0
- 订阅数 2
活动概览
Pete 的最新活动-
Pete 进行了评论，
I had a tag with a typo, now it works. Thanks for your help!
-
Pete 创建了一个帖子，
Tags error when pooling data from an Allen Bradley PLC
I get errors when I am pooling data from an Allen Bradley PLC if I don't activate : disable tags error in general/global settings/advanced parameters. I don't understand the fonction of this parame...
-
Pete 进行了评论，
If no one can answer, can someone direct me to another service so that I can get an answer and resolve my problem?
-
Pete 进行了评论，
We are pooling data from a bacnet HVAC device on the wan side. Network topology: 1 - On Ewon power on, communication doesn’t work. ( see picture no 2 ) The Ewon seem to register is BACnet...
-
Pete 进行了评论，
Thanks ! it works fine. Like I said I am pooling data with the bacnet server from a device located on the WAN side. I set WANitfProt to 2 to allow WAN to LAN communication. It works fine for 2 days...
-
Pete 进行了评论，
Thanks ! What is the best way to write data coming from an ioserver to another ioserver ? Should I use script in BASIC IDE ?
-
Pete 进行了评论，
I have already done this on another project and the devices were on the LAN side, and it worked well, in this case the bacnet server is on the WAN side and the Siemens PLC is on the LAN side and it...
-
Pete 创建了一个帖子，
FLEXY205 ioserver LAN to WAN
I would like to exchange data between an HVAC controller that uses the Bacnet communication protocol on the WAN side and a Simens PLC on the LAN side, is this possible?