David_Nolan

  • 活动总数 11
  • 最后的活动
  • 成员加入日期
  • 正在关注 0 名用户
  • 关注者数 0 名用户
  • 投票数 0
  • 订阅数 2

活动概览

David_Nolan 的最新活动

  • David_Nolan 进行了评论，

    1. 社区
    2. Ewon - Flexy
    3. OPCUA Certificate Error

    Thanks! You guys never let me down!

  • David_Nolan 进行了评论，

    1. 社区
    2. Ewon - Flexy
    3. OPCUA Certificate Error

    I'm not sure we are both on the same page regarding this problem: I am not using Ignition, but rather a Unified Automation .NET library, and and was looking more for insight into how the UA server...

  • David_Nolan 进行了评论，

    1. 社区
    2. Ewon - Flexy
    3. OPCUA Certificate Error

    the IP field in the certificate properties is 10.0.0.253. the actual IP address is the one shown in my above screenshot. the UA expert client actually connects and i can read data. so the certifica...

  • David_Nolan 创建了一个帖子，

    OPCUA Certificate Error

    1. 社区
    2. Ewon - Flexy

    OK, so i am trying to connect to the OPC UA server using UA Expert. I have the server in certificate mode on the Ewon. i am ultimately able to connect to the server, but only if i ignore the below ...

    • David_Nolan
    • 2 个关注者
    • 6 条评论
    • 0 票

  • David_Nolan 进行了评论，

    1. 社区
    2. Ewon - Flexy
    3. Where can I find the eWON TAG GENERATOR file

    eWON TAG GENERATOR REV 6.xlsm (41.9 KB) Here is the one I am using.

  • David_Nolan 进行了评论，

    1. 社区
    2. Ewon - Flexy
    3. Where can I find the eWON TAG GENERATOR file

    Tom, In your GENERATOR REV 5 workbook, just remove column K (the "Type" column). Then, insert two columns after BA ("FCO"), and call them "KPI", and "Type". I was able to use the generator against ...

  • David_Nolan 进行了评论，

    1. 社区
    2. Ewon - Flexy
    3. Where can I find the eWON TAG GENERATOR file

    Deryck, I was able to get it working. Because firmware 13.2 adds a column to var lst for the KPI property, and moves the "Type" column to a different location in the table, the current tag generato...

  • David_Nolan 进行了评论，

    1. 社区
    2. Ewon - Flexy
    3. Where can I find the eWON TAG GENERATOR file

    Edit: I was able to get it working, and have described the solution below.

  • David_Nolan 进行了评论，

    1. 社区
    2. Ewon - Flexy
    3. Where can I find the eWON TAG GENERATOR file

    I think there is a problem using this tag generator workbook with flexy firmware version 13.2PR. I have used it successfully in firmware 13.0, but it appears the column format of the var file chang...