jiayuan0727

  • 活动总数 11
  • 最后的活动
  • 成员加入日期
  • 正在关注 0 名用户
  • 关注者数 0 名用户
  • 投票数 0
  • 订阅数 4

活动概览

jiayuan0727 的最新活动

  • jiayuan0727 进行了评论，

    1. 社区
    2. Ewon - Talk2M
    3. Evidence showing SMS has been sent

    Thanks Kyle, i have been using talk2m relay with the following command: SENDMAIL "0044xxxxxxxxxx@sms.talk2m.com,0044xxxxxxxxxx@sms.talk2m.com","",B$,"Gas Pressure Alarm" I top up on a regular basis...

  • jiayuan0727 创建了一个帖子，

    Evidence showing SMS has been sent

    1. 社区
    2. Ewon - Talk2M

    Hi everyone, Has anyone come accross with the unsuccessfully SMS relay? According to the log in ecatcher, an SMS was sent to two mobile numbers, but neither of the two engineers recieved it. Is it ...

    • jiayuan0727
    • 2 个关注者
    • 3 条评论
    • 0 票

  • jiayuan0727 创建了一个帖子，

    Flexy 205 with 4G only online for 2 hours every day

    1. 社区
    2. Ewon - Flexy

    Hi  I have a flexy 205 with 4G Eu extention cards, recently i start having an strange issue. Every midnight, the eWon is online at about 00:00, then offline after about 2 hours. SIM card seems OK? ...

    • jiayuan0727
    • 2 个关注者
    • 1 条评论
    • 0 票

  • jiayuan0727 创建了一个帖子，

    Flexy 205 connect to a vibration sensor

    1. 社区
    2. Ewon - Flexy

    Hi everyone, Has anyone had any experience in pulling data from motor vibration sensors (such as ABB Smart Sensor, or other brands...) Thanks for your attention Jiayuan

    • jiayuan0727
    • 2 个关注者
    • 1 条评论
    • 0 票

  • jiayuan0727 进行了评论，

    1. 社区
    2. Ewon - Flexy
    3. How to share data between 2x Flexy

    Separate locations under the different talk2m accounts, so it won't work that way?

  • jiayuan0727 进行了评论，

    1. 社区
    2. Ewon - Flexy
    3. How to share data between 2x Flexy

    That looks amazing. But i could not make it work here. Does it have to be the same IP range for the two flexys, and i dont see in your code where you defined the site tag (Tanklevel) and where you ...

  • jiayuan0727 进行了评论，

    1. 社区
    2. Ewon - Flexy
    3. How to share data between 2x Flexy

    Thanks a lot, i have been looking for a data concentration solution like this to visualize data from multiple eWons in M2web. This is great to start with, I will have a try.