pmccutcheon

  • 活动总数 22
  • 最后的活动
  • 成员加入日期
  • 正在关注 0 名用户
  • 关注者数 0 名用户
  • 投票数 0
  • 订阅数 2

活动概览

pmccutcheon 的最新活动

  • pmccutcheon 进行了评论，

    1. 社区
    2. Anybus - Gateways
    3. EN2MB-R setup issues 8/12

    re the MAC ID issue: -the text on the label of the unit says MAC X2 but I am positive it is for the Ethernet/IP side, which I would have said is network ONE (not 2) -to get the MAC of the MODBUS si...

  • pmccutcheon 进行了评论，

    1. 社区
    2. Anybus - Gateways
    3. EN2MB-R setup issues 8/12

    okay, solved the "setting the Modbus side IP address issue" - pretty easy - just turn off DHCP in the dialog box - this allows the IP address to be set

  • pmccutcheon 进行了评论，

    1. 社区
    2. Anybus - Gateways
    3. EN2MB-R setup issues 8/12

    EClipboard042814Ã1504 680 KB Setting the IP address on the MODBUS side was unable to set here : is there a trick? If I am supposed to use BOOTP : then the unit only lists ONE MAC address on the s...

  • pmccutcheon 进行了评论，

    1. 社区
    2. Anybus - Gateways
    3. EN2MB-R setup issues 8/12

    this one seems minor for now, dialog box actual not matching manual version

  • pmccutcheon 进行了评论，

    1. 社区
    2. Anybus - Gateways
    3. EN2MB-R setup issues 8/12

    EClipboard021391Ã654 180 KB this is the "clipped dialog box" issue pretty awkward, I can't tell what's going on, really blind here

  • pmccutcheon 进行了评论，

    1. 社区
    2. Anybus - Gateways
    3. EN2MB-R setup issues 8/12

    Couple issues still unclear to me: -on the side of the unit it says "MAC X2" with the MAC ID --> I would guess this is talking about X2, the bottom connections -when I run BOOTP, I get this MAC...

  • pmccutcheon 进行了评论，

    1. 社区
    2. Anybus - Gateways
    3. EN2MB-R setup issues 8/12

    it was totally unclear to me that I had to be online with the gateway (!) you need to: -have the gateway powered up -use BOOTP to set the address of the gateway -probably check in RSLINX that it ca...

  • pmccutcheon 进行了评论，

    1. 社区
    2. Anybus - Gateways
    3. EN2MB-R setup issues 8/12

    I am not even attempting to go online with the unit at this point. I am trying to make an offline edit, configuration editor is empty.

  • pmccutcheon 进行了评论，

    1. 社区
    2. Anybus - Gateways
    3. EN2MB-R setup issues 8/12

    I tried another laptop I get the exact same issue with the AUTHENTICATIOn question

  • pmccutcheon 进行了评论，

    1. 社区
    2. Anybus - Gateways
    3. EN2MB-R setup issues 8/12

    I'm not even at the point of going online I thought I was supposed to enter some kind of config offline first