mitchell.hein

1. 社区
2. Ewon - Flexy
3. ablsrv-CIP Error Code in Reply: (30)

We had 20 tags out of nearly 400 which were not required on our new system, so they were undefined in the PLC. What was confusing is that even a SINGLE TAG is not defined, you get this message on e...

• 查看评论
• mitchell.hein
• 2018年10月01日 14:55
• 0 票

1. 社区
2. Ewon - Flexy
3. Flexy 205 doesn't recognize a valid Internet Connection

Yes. It passes the WAN Connection, and fails the Internet connection. The weird part is that the 4005CD units never had this issue, and the Flexy 205 (with the V12.2s1 software) does.

• 查看评论
• mitchell.hein
• 2018年09月05日 13:36
• 0 票

1. 社区
2. Ewon - Flexy
3. Flexy 205 doesn't recognize a valid Internet Connection

OK: here's what I have so far. I used to set up eWON 4005CD and Flexy 201 units at my desk. The wizards had no problem accessing the internet via DHCP with the WAN cable I provided. Yesterday, I tr...

• 查看评论
• mitchell.hein
• 2018年09月05日 14:10
• 0 票

1. 社区
2. Ewon - Flexy
3. Flexy 205 doesn't recognize a valid Internet Connection

If device.api.talk2m.com wasn't whitelisted and our firewall blocked that particular access, would that cause the Internet Connection test to fail?

• 查看评论
• mitchell.hein
• 2018年09月05日 14:39
• 0 票

1. 社区
2. Ewon - Flexy
3. Flexy 205 doesn't recognize a valid Internet Connection

Actually, this problem wasn't solved by this information. We whitelisted *.talk2m.com in our firewall, and the Internet Access Wizard still failed the Internet Connection test. The reason is that t...

• 查看评论
• mitchell.hein
• 2018年10月26日 14:18
• 1 票

1. 社区
2. Ewon - Flexy
3. Flexy 205 doesn't recognize a valid Internet Connection

I just attempted to configure a second device, and I still find that I cannot establish an Internet Connection in the eWON Connection Wizard, even though we have whitelisted *.talk2m.com in our fir...

• 查看评论
• mitchell.hein
• 2018年10月26日 14:09
• 0 票

1. 社区
2. Ewon
3. Losing the ability to establish a VNC Connection

Ping? Yes. We haven't lost the ONLINE status, and when we connect, we can ping the devices on the eWON's LAN. We use UDP because it is required to upload, download, and monitor our PLC and HMI at ...

• 查看评论
• mitchell.hein
• 2017年08月25日 21:11
• 0 票

1. 社区
2. Ewon
3. Losing the ability to establish a VNC Connection

As I expected, we had another system which lost the ability to establish a VNC connection this weekend. However, I dug into the issue a bit further, and determined that the eWON is NOT the issue. I...

• 查看评论
• mitchell.hein
• 2017年08月28日 13:55
• 0 票

1. 社区
2. Ewon
3. Losing the ability to establish a VNC Connection

I'm in the process now of obtaining the backup, but I don't believe it will help you. I've checked the Event Log and Real Time Log, and there are no eWON faults, warnings, or anything in the traces...

• 查看评论
• mitchell.hein
• 2017年08月25日 19:04
• 0 票

1. 社区
2. Ewon
3. Losing the ability to establish a VNC Connection

Hi Ashley, I'd agree that the HMI (or VNC host) would normally be the first suspect. However: First, we must consider that we've had 4 years of communication experience at 28 sites without this sit...

• 查看评论
• mitchell.hein
• 2017年08月25日 18:07
• 0 票