reset simultaneously Midea intesis Box Problem

sajjad

• 2024年11月04日 12:23
• 已编辑于

Hello

I have a AC Intesis box Interface for Midea Brand to connect to KNX system. (16unit license IN770AIR00SO000)

I have problem to configure the device. as I send my configuration to the device, the device reset simultaneously and doesn't work anymore. but before sending configuration, the device is connected and finds the indoor units (8 units). and I should reset factory device to work normally. Anyone can help me about this problem? 

0

• 

  Franziska Gültig

  • 2024年11月27日 09:03

  Hi Sajjad,

  I hope you're doing well. I wanted to check in to see if this issue is still ongoing.

  If it is, I’d recommend opening a support ticket (since this an issue needs deeper analysis) and I recommend to add additional information. Can you get a Backup from the Device, the LED Behavior, the Configuration you tried to download... please attach them to the Support case, which will help our team address the issue. 

  If you can not get some of them explain what you tried.

  Please note that while the forum is a great place for discussions, the dedicated support team primarily addresses issues through the ticketing system. For urgent matters, or things needing a detailed analysis, opening a ticket directly is always the best approach.

  br

  Franziska Gültig

  0

请先登录再写评论。