Cm CANopen communication with slave without EDS-file

Michiel

• 2019年08月22日 13:05

Hello,

At my firm we are working with the S7-1200 PLC of Siemens. We want to communicate with a slave device that is a custom-made AC-unit. Therefore we purchased the "cm CANopen' device 021620-B to establish this connection. The whole setup (s7-1200 + cm Canopen + slave) is correctly connected. I downloaded the configuration studio and here I need to download the EDS-file into the module. The problem is that the manufacturer doesn't have an EDS-file of their own custom-made unit, only a document filled with information and adresses that can be used to make an EDS-file of our own. Now is my question: is it possible to create an EDS-file with the given information (like the document the manufacturer send us) and if yes, how is it possible?

I can send the file the manufacturer gave us if necessary.

Kind regards,

Michiel Kuipers

1

• 

  Deryck Beliveau

  • 2019年08月22日 14:12

  Hello @Michiel,

  It should be possible to create an eds if given the correct info but it is not recommended as it usually required someone familiar with the product and the CANopen/EDS specs. Typically we encourage a customer to get a know valid EDS from the devices manufacturere as it is a difficult process to create one.

  Here are some eds files we provide for our CANopen Communicator, it might give you an idea on some of the requirements. https://www.anybus.com/docs/librariesprovider7/default-document-library/firmware-software/hms-eds-abc-cop.zip?sfvrsn=ae6eadd6_6

  Deryck

   

   

  0

请先登录再写评论。