Set up I/0 Tags and Alarms

mmahana

• 2019年02月20日 20:37

I am trying to set up alarm notifications (email and/or SMS) based on I/O inputs. Are there any KB articles or how to documents on setting this up.

I am using the Flexy 201 on the latest firmware and a 3401 card.

0

• 

  Deryck Beliveau

  • 2019年02月20日 20:40

  Hello @mmahana,
  We have videos covering alarms here: https://ewon.biz/e-learning/library/flexy/alarming

  You can also refer to chapter 7 of the user manual: https://websupport.ewon.biz/sites/default/files/um-0002-00-en-flexy-family.pdf

  Regards,
  Deryck

   

   

  0
• 

  mmahana

  • 2019年02月25日 21:43

  thanks. I will give this a shot.

  0
• 

  mmahana

  • 2019年02月26日 16:21

  Deryck

  Im probably overlooking it, but I'm missing the step of associating a tag with DI either on the flexy base unit or the IO card.

  0
• 

  Tim Beaulieu

  • 2019年02月26日 16:33

  Hello,

  The diagram below should be pretty helpful for figuring out the Tag IDs for each of these

   

  

   

  ig-0030-00-flx-3402-io-8di-4ai-2do-extension-card.pdf

   

  But it should be able to be setup with the following settings as an example.

   

  

   

  The following script should also be helpful if you want to send out emails through the BASIC IDE instead:
  IO Email.txt (1.0 KB)

   

   

   

   

  0
• 

  mmahana

  • 2019年02月27日 16:36

  Thanks Tim.

  Got it working.

  Regards,

  **MIKE MAHANA | **INS

  Application Engineering

  800.889.1461 x129 | www.industrialnetworking.com

  

  0

请先登录再写评论。