DHCP Server setup on Flexy or Cosy

Kyle Reynolds

• 2018年12月11日 22:07

@anonsemtrcdo
How do I set up a DHCP server on my Ewon's LAN?

0

• 

  Kyle Reynolds

  • 2018年12月11日 22:09

  Please follow these instructions: DHCP Server on LAN

  Example:

  LANDHCPSEnable:1 [1=Enable, 0=Disable (default)]
  LANDHCPSStartIP:192.168.120.20 [Start address of DHCP pool]
  LANDHCPSEndIP:192.168.120.40 [End address of DHCP pool]
  LANDHCPSLogLevel:1 [Sets logging to moderate, 0=low (default) 2=high]
  LANDHCPSDns1:8.8.8.8 [use known good DNS server]
  LANDHCPSDns2:8.8.4.4 [alternate DNS server]

  These settings can be found in comcfg.txt (Setup > System > Storage > Edit COM cfg)

  0
• 

  tdstech

  • 2018年12月17日 16:56

  Hi Kyle,

  Sorry for disturbing to this conversation.

  I already follow the file instructions, but the device connected to the flexy doesn't get the internet access. What should i do?

  Thanks.

  0
• 

  Kyle Reynolds

  • 2018年12月19日 14:45

  If you want to give devices on the LAN internet access you will have to change some security settings and make sure they have the eWON's address set as their gateway.

  Go to Setup System Storage Edit COM cfg and make these changes:
  Natltf = 2 (This sets "NAT and TF on WAN')
  VPNRedirect = 0 (Allows traffic outside the VPN tunnel)
  FwrdToWAN = 1 (Allows forwarding LAN&VPN traffic to WAN)

  Kyle

  0
• 

  Kyle Reynolds

  • 2018年12月19日 15:14

  These settings can also be found in the UI here:

  In Setup System Communication Networking Routing
  Natltf = 2 (This sets "NAT and TF on WAN')
  VPNRedirect = 0 (Allows traffic outside the VPN tunnel)
  

  

  image1217Ã257 18.2 KB

  In Setup System Communication Networking Security
  FwrdToWAN = 1 (Allows forwarding LAN&VPN traffic to WAN)
  

  

  image1208Ã214 20.7 KB

  0
• 

  tdstech

  • 2018年12月20日 13:17

  Hi Kyle,

  Your solution is perfect. Its working now. Now my device can have the internet access between i can remote access the other device also.

  Thank you so much.

  0

请先登录再写评论。