Komlan

1. Comunidade
2. Anybus
3. Need Guidance or reference design Anybus CompactCom B40

Hi Monesh, No, RMII is not a requirement for communication between the ABCC40 and the host. If the communication interface you would like to use between your host and the ABCC40 is SPI, then you si...

• Visualizar comentário
• Komlan
• 28 de agosto de 2024 12:42
• 1 voto

1. Comunidade
2. Anybus - Gateways
3. AB7318-B Status for Multiple Frames Sharing the Same CAN ID

Hello, The reception trigger byte and the transaction status byte are both triggered by a change in the transaction, however, as you pointed out, they don't provide any information on the specific ...

• Visualizar comentário
• Komlan
• 16 de janeiro de 2024 10:12
• 1 voto

1. Comunidade
2. Anybus
3. Network initialization error using the Anybus profinet M40 module

Hi Asaad, I'm guessing this issue could be the result of the way your ADI mapping was done. In the ABCC40 PROFINET, there's a limitation to 128 submodules, and in the ADI based configuration, each ...

• Visualizar comentário
• Komlan
• 17 de novembro de 2023 14:55
• Editado
• 0 voto

1. Comunidade
2. Anybus
3. Network initialization error using the Anybus profinet M40 module

Hi Asaad, What do those 128 ADIs amount to in terms of data size? Did you check the value of ABCC_CFG_MAX_PROCESS_DATA_SIZE in abcc_drv_cfg.h?

• Visualizar comentário
• Komlan
• 14 de novembro de 2023 07:18
• 0 voto