Pete
- Atividade total 10
- Última atividade
- Membro desde
- Seguindo 0 usuário
- Seguido por 0 usuário
- Votos 0
- Assinaturas 2
Visão geral da atividade
Atividade mais recente por Pete-
Pete comentou,
I had a tag with a typo, now it works. Thanks for your help!
-
Pete criou uma publicação,
Tags error when pooling data from an Allen Bradley PLC
I get errors when I am pooling data from an Allen Bradley PLC if I don't activate : disable tags error in general/global settings/advanced parameters. I don't understand the fonction of this parame...
-
Pete comentou,
If no one can answer, can someone direct me to another service so that I can get an answer and resolve my problem?
-
Pete comentou,
We are pooling data from a bacnet HVAC device on the wan side. Network topology: 1 - On Ewon power on, communication doesn’t work. ( see picture no 2 ) The Ewon seem to register is BACnet...
-
Pete comentou,
Thanks ! it works fine. Like I said I am pooling data with the bacnet server from a device located on the WAN side. I set WANitfProt to 2 to allow WAN to LAN communication. It works fine for 2 days...
-
Pete comentou,
Thanks ! What is the best way to write data coming from an ioserver to another ioserver ? Should I use script in BASIC IDE ?
-
Pete comentou,
I have already done this on another project and the devices were on the LAN side, and it worked well, in this case the bacnet server is on the WAN side and the Siemens PLC is on the LAN side and it...
-
Pete criou uma publicação,
FLEXY205 ioserver LAN to WAN
I would like to exchange data between an HVAC controller that uses the Bacnet communication protocol on the WAN side and a Simens PLC on the LAN side, is this possible?