taivlaca
- Atividade total 10
- Última atividade
- Membro desde
- Seguindo 0 usuário
- Seguido por 0 usuário
- Votos 0
- Assinaturas 1
Visão geral da atividade
Atividade mais recente por taivlaca-
taivlaca comentou,
Kevin, sorry for not fully understanding. The temperature is displayed on the Fujitsu RC which is the master and the temperature displayed is the temperature from the probe on the RC (not the temp...
-
taivlaca comentou,
Fujitsu UTY-RVNUM Wired Remote Controller is the RC I have.
-
taivlaca comentou,
doctor, thank you for your detailed response. You are correct, the units are too different for me to receive any helpful hints for my problem. Kevin_hms I am confused with your suggestion. Below ...
-
taivlaca comentou,
The temperature sensor on the RC unit is functioning fine. The temperature displayed is correct:it is just not transferring that number to the INTESIS unit or the unit is not sending the info to t...
-
taivlaca comentou,
Kevin, I have done what I can on my end and I am aware that the Intesis units themselves do not have a temperature sensor. Even if they did, that would not be the temperature I would want to use b...
-
taivlaca comentou,
Kevin, I have a wired remote controller as well as the Intesis wired onto each unit. The system is set up to take temperature at the wired remote controller which is within the rooms (while the re...
-
taivlaca comentou,
Kevin, any thoughts?
-
taivlaca comentou,
Hi Kevin:sorry for delayed response. The product code for the INTESIS units is INWFIFGL001R0XX.
-
taivlaca criou uma publicação,
Ambient temp display
I have recently installed 3 of these units AC Cloud Control. to control our Fujitsu Halcyon system. The INTESIS controllers are set as slave to master wired remote controller on the walls of each ...