Charles_UAS
- Atividade total 11
- Última atividade
- Membro desde
- Seguindo 0 usuário
- Seguido por 0 usuário
- Votos 0
- Assinaturas 1
Visão geral da atividade
Atividade mais recente por Charles_UAS-
Charles_UAS comentou,
increasing maxcell time seems making the connection more stable, thanks.
-
Charles_UAS comentou,
will try it. by the way, the FALLBACK function wouldn't help to maintain the connection in this case?
-
Charles_UAS comentou,
image1828Ã896 113 KB captured this one, it happens during pulling the data logs
-
Charles_UAS comentou,
image1186Ã427 111 KB I checked the logs, it actually shows disconnected. it is a cell type but the fallback to cable is enabled and plugged in. cable internet is good as well as 4G signals.
-
Charles_UAS comentou,
agree, that makes sense, using LAN port to pin that subnet address. I was thinking to use subnet address over the cloud, it opens, but it would be the same thing if I lost the cloud. thanks, Kyle
-
Charles_UAS comentou,
I will try to capture it next time when it happens
-
Charles_UAS comentou,
is there any solid way to do this when you are local, rather than always over the cloud even you are in local?
-
Charles_UAS comentou,
sometime while I am on the flexy config window, the window just closes then ie stops, cant open that screen again. randomly happens, why?
-
Charles_UAS comentou,
hi, Kyle. I got it worked under s73400. but havent read those links. I will. thanks for help
-
Charles_UAS criou uma publicação,
Pulling data from siemens im151-8 pn/dp cpu
hi TIM, questions: if the ethernet port is the only communication on im151-8 cpu, which IO server I should select, S73&400 or S7200? there is an ethernet cable from PLC port to port 1 on Flexy al...