igor.silva
- Atividade total 18
- Última atividade
- Membro desde
- Seguindo 0 usuário
- Seguido por 0 usuário
- Votos 0
- Assinaturas 2
Visão geral da atividade
Atividade mais recente por igor.silva-
igor.silva comentou,
So there is no way to read the data otherwise I change my plc to client?
-
igor.silva criou uma publicação,
Modbus TCP
Hi, I have a Schneider PLC configured as a Modbus TCP master of the network and I need to read some memory words from this PLC using a Flexy205, I have already configured as shown in the following ...
-
igor.silva comentou,
I need to simulate a value to the tag in the first picture.
-
igor.silva comentou,
kyle 11486Ã36 6.9 KB kyle 21486Ã928 72.1 KB kyle 31446Ã761 43.1 KB . See, it's not working!
-
igor.silva comentou,
Ok. I got it. I will have to write at the address and see the data at the Flexy. So, i will need a modbus slave. I'll try it.
-
igor.silva comentou,
So, should I stick with CAS Modbus Scanner, right?
-
igor.silva comentou,
I have created the tags on the flexy and I have their modbus address. I need to comunicate with them. Because I will make a presentation to my client. He will just take the flexy and install in his...
-
igor.silva comentou,
What software can I use as a Modbus master?
-
igor.silva comentou,
I'll be more clear. Here's the deal, I'm connected to the flexy 205 through one of the LAN ports. I have the modbus addresses it will be used in the poject and I need to show them working when I ac...
-
igor.silva comentou,
I'm trying to verifyy if my connection with the flexy is ok. Just like in this topic: Modbus tool. But it's not working