Tim Beaulieu
- Atividade total 191
- Última atividade
- Membro desde
- Seguindo 0 usuário
- Seguido por 0 usuário
- Votos 0
- Assinaturas 46
Comentários
Atividade recente por Tim Beaulieu-
It should be available in all of the Flexy devices. I'm not quite sure what firmware this was first included in, but I believe this feature has been available for a while. I think anything in the 1...
-
Adding this seemed to fix it image1366Ã615 73.3 KB
-
Hi Dave, If you use two Wireless Bridges II OR two Bolts OR one AWB II and one Bolt in the tunnel Mode you can transfer even Broadcast Ethernet Frames. So you can also tansfer Ethercat frames. But ...
-
Hi @MD_Raja, What is the LAN IP address of the Ewon device and the Modbus TCP device? Is it responding to pings? Do you have disable tags in error set on the device? -Tim
-
Hi Chris, I'm including the manual for the device below, can you check and make sure you have the wiring for the device correct? image808Ã430 73.3 KB cdn.hms-networks.com inw...
-
Hi Chris, did you check that your Fujitsu device is in the list of compatible devices on the Intesis page?
-
Hi Lam, here's a list of devices that we can guarantee we're compatible with. Unfortunately I didn't see the AOU18RLB model number in that list https://www.intesis.com/favicon_HMS.ico https://www...
-
Hi @lvuhome, I was looking for that error code and found this page that included the error you mentioned. image837Ã507 52 KB So it looks like your device is running into issues reaching the AC un...
-
Hi @Dewy, I'm going to close this ticket out for now, but if it happens again you can still comment on this ticket. Please let me know if you run into the same issue again. -Tim
-
That shouldn't be an issue if you're not deleting files