Randy Ayscue
- Atividade total 23
- Última atividade
- Membro desde
- Seguindo 0 usuário
- Seguido por 0 usuário
- Votos 0
- Assinaturas 1
Visão geral da atividade
Atividade mais recente por Randy Ayscue-
Randy Ayscue comentou,
Thought I would give replying to this thread a shot even though it has been closed. We had resolved my issue some time ago but it has come up again after we changed our email provider. After our SM...
-
Randy Ayscue criou uma publicação,
Cosy 131 power
The specifications for the Cosy 131 show a maximum input power of 30W @ 24vdc. For a model EC61330 what would be the typical power usage?
-
Randy Ayscue comentou,
Kyle, Thanks for the info. All seems to be working now. It seems my idea of restoring a backup from the other Cosy did not work. I thought I could do this and then just change the IP addresses. How...
-
Randy Ayscue comentou,
Kyle, So I'm trying to get everything working for this Cosy installation. This is my second location replacing a Cisco router with a Cosy. The first location where I installed the Cosy is still wor...
-
Randy Ayscue comentou,
Kyle, Changing to static WAN seems to have fixed the issue with connecting to the internet without having to power cycle the Cosy. Everything seems to be working properly now. So I have just inst...
-
Randy Ayscue comentou,
Kyle, Can you point me to where these settings are in the Cosy configuration? Randy
-
Randy Ayscue comentou,
Kyle, Sounds good. I did want to follow up once more about the issue with the Cosy not connecting to the internet through the cell modem if both are powered on at the same time. Yesterday someone d...
-
Randy Ayscue comentou,
Kyle, I may have discovered my issue or part of my issue. There is a setting in the Red Lion HMI called "Comms Delay". It was set to 0 ms. The manual states in regards to this setting, "The Comms D...
-
Randy Ayscue comentou,
Let's plan on doing it in the morning if that works for you. Randy
-
Randy Ayscue comentou,
One of the issues we had with the Cisco was we were using the built in ethernet switch and devices on the LAN tended to lose connection. I'm wondering if the Cosy may have the same issue. Do you th...