Cm CANopen communication with slave without EDS-file
Hello,
At my firm we are working with the S7-1200 PLC of Siemens. We want to communicate with a slave device that is a custom-made AC-unit. Therefore we purchased the "cm CANopen' device 021620-B to establish this connection. The whole setup (s7-1200 + cm Canopen + slave) is correctly connected. I downloaded the configuration studio and here I need to download the EDS-file into the module. The problem is that the manufacturer doesn't have an EDS-file of their own custom-made unit, only a document filled with information and adresses that can be used to make an EDS-file of our own. Now is my question: is it possible to create an EDS-file with the given information (like the document the manufacturer send us) and if yes, how is it possible?
I can send the file the manufacturer gave us if necessary.
Kind regards,
Michiel Kuipers
-
Hello @Michiel,
It should be possible to create an eds if given the correct info but it is not recommended as it usually required someone familiar with the product and the CANopen/EDS specs. Typically we encourage a customer to get a know valid EDS from the devices manufacturere as it is a difficult process to create one.
Here are some eds files we provide for our CANopen Communicator, it might give you an idea on some of the requirements. https://www.anybus.com/docs/librariesprovider7/default-document-library/firmware-software/hms-eds-abc-cop.zip?sfvrsn=ae6eadd6_6
Deryck
0
Por favor, entrar para comentar.
Comentários
1 comentário