Rockwell Transfer Utility

mareimers

• 28 de setembro de 2018 13:10

I am having difficulties seeing a Panelview Plus 7 HMI behind a Cosy.

Cosy is set as gateway (172.16.1.254)
Panelview (172.16.1.72) is visible to ping from the remote computer and I can remotely access the panel via its remove viewer (VNC Viewer).

I can see the HMI in RsLinx with the ETH driver, but it doesn't show up in the Transfer Utility (9.00 Rockwell). Since RsView uses Rslinx Enterprise (5.9.00) any Ideas?

0

• 

  jseanor

  • 28 de setembro de 2018 13:35

  @mareimers

  In order to establish this connection you need to add the device explicitly inside of FactoryTalk View Studio. Once inside of View Studio, you will want to navigate to the connection settings and explicitly add your PanelView into the connection.

   

   

  0
• 

  mareimers

  • 28 de setembro de 2018 19:02

  Can you point me to a place that has the procedure to do this. I am not
  having luck finding how to do accomplish this.

  0
• 

  jseanor

  • 28 de setembro de 2018 19:03

  @mareimers

  Glad it is working for you!

  Please let us know if you have any further isuses.

   

  0
• 

  mareimers

  • 2 de outubro de 2018 14:50

  Found it: It is not in the Factorytalk studio. It is in the factorytalk control console. Finally works: Thank you

  0

Por favor, entrar para comentar.