Multiple plc's connected to profinet io device

Deryck Beliveau

• 27 de março de 2019 12:52

@anonouwprakj
Hi Kamaesh,

I will look into how you can connect 2 plc's to the profinet side and reach back out.

Here is the document we have for adding just one plc.

Deryck

0

• 

  Deryck Beliveau

  • 27 de março de 2019 13:16

  Hello Kemaesh,

  After talking to my colleagues, the profinet IO connection only supports 1 connection. You would need to have just one device connect to it then sync the data between the two plc's themselves.

  Another possible option, if you have a newer Siemens plc, would be to use a modbus TCP gateway and have the plc's exchange data with modbus. Newer Siemens plc's support being both a modbus tcp server and client. Depending on how you want to configure the plc's modbus you would need our modbus tcp master (AB9006) or the modbus tcp slave gateway( AB7632).

  Deryck

  0
• 

  anonouwprakj

  • 28 de março de 2019 12:50

  Hi Deryck, Did we get any solution to my problem?

  Kaamesh

  0
• 

  Deryck Beliveau

  • 28 de março de 2019 15:44

  Hello Kamaish,

  As mentioned in my last response we can only have one profinet master connected to the device at a time.

  Deryck

  0

Por favor, entrar para comentar.