Kyle Reynolds
- 合計アクティビティ 664
- 前回のアクティビティ
- メンバー登録日
- フォロー 0ユーザー
- フォロワー 3ユーザー
- 投票 17
- サブスクリプション 180
コメント
Kyle Reynoldsによる最近のアクティビティ-
OK - Please change NATItf to 3 The rest of the settings look good and if the modem was already configured to be bridged to the Cisco, it should work with the Cosy. Reboot the Cosy and try again. If...
-
I'm sorry, I used a screenshot from the Flexy. I think I figured out why this isn't working though. I was under the impression that you were using an eWON with an internal cellular modem, but it lo...
-
Hi Randy, Please send me your configuration so I can check. Use eBuddy Backup/Restore and do a backup with Support Files and attach that file to your response. Thanks, Kyle
-
Hi Randy, That looks correct. It doesn't really matter what port you use, as long as it doesn't conflict with something else, so 8080 is fine. That port number will be used in the URL when you are ...
-
We normally accomplish this using NAT 1:1 to create an IP for the LAN device that can be accessed via the WAN, but that would only work if you had another public IP address available, which you pro...
-
Randy, try changing NATItf back to 2, rebooting, and see if it still works. If not, we can probably come up with an alternative.
-
Sorry you also need to change: "ProxySrvPort1' should be "80' "ProxyPort1' should be "8080'
-
We remove any personal info before approving any post and we can also make it a private thread.
-
Hi Dave, I'm unable to locate the backup so if you could send me a new one that would be great. Please make sure to check "Include Support Files" in eBuddy. Thanks, Kyle
-
You need to disable NAT on LAN (Plug n Route) and set it to NAT on WAN. This is the same as setting NATItf=2. Reboot and it should work fine.