Deryck Beliveau
- 合計アクティビティ 369
- 前回のアクティビティ
- メンバー登録日
- フォロー 0ユーザー
- フォロワー 3ユーザー
- 投票 5
- サブスクリプション 113
コメント
Deryck Beliveauによる最近のアクティビティ-
For the canopen Master you need to set the size though the CANopen side, objects 3000 and 3001, Typically via the ACM CANopen Online Object access tool. After setting the size you need to write S...
-
Hi Veith, Any GSD files for our devices that we provide should be on the Support pages. You can find the HMS_1810.gsd under config files here: https://www.hms-networks.com/p/ab6000-b-anybus-ic-pro...
-
Hello Thomas, Sorry for the late response here. If you have not resolved typically this issue is suspect this has something to do with the ADI's being mapped. Often this is the data being mapped ...
-
Hello Jose, This sounds correct the device name is stored on the CompactCom module. After replacing it the name will need to be set again. In some scenarios for device replacement the alias name ...
-
Hello Tiger, The 2.xx vs 1.xx is regarding the firmware version on the compactcom. There are some changes required for firmware > 2.00. The GSD zip files downloaded from the site are for the i...
-
Are you using an M40 or M30 Profinet module?
-
Hello Gioele, I am not familiar with the setup of PROFINET devices in Code Codesys. It is difficult to tell from the screen shot but i cant tell if you are in the setup section for Module mappin...
-
Hi Gioele, I am doubtful it is an issue with the GSD. Can you share additional on what you are trying? What trouble are you having with the remap?
-
Hello Gioele, With ABCC_CFG_REMAP_SUPPORT_ENABLED you can dynamicly map input and output modules on PROFINET. The example application includes a basic example of the required ABCC_CbfRemapDone() f...
-
Hello Raghu, It looks like you have a custom article number for Epson. May have firmware specific for their device. The host devices may not work with different module firmware. I recommend reac...