Anybus EIP Class 3 CCW Application Note

Anybus Settings: 

EtherNet/IP interface settings within the same subnet. 

Confirming IO Size of the project in CCW and Enabling the “Same I/O Sizes for both Networks” & please be advised to Enable Byte Swap  

IP Address settings in CCW CIPGENERIC & Refer to “R4 QS Rev4.pptx” for reference 

Also this video will help for the Read&Write AppCfg for the Anybus Gateway 

Matching IO Size – Also making sure the Parameters are the correct setting.  

When it is working, can you see data in the Anybus Gateway 

From CCW you should be able to see value changes 

Data from the other network are in “ResData”