eWON flexy 201 username and password forgot

azamali

• 2020年06月08日 19:54

I have eWON flexy 201 installed at one site which is online but i forgot the username and password:how to reset only username and password without disturbing my other configuration so site should be online as it is .

0

• 

  Kevin Annis

  • 2020年06月08日 19:59

  Hello,

  You can perofrm the user reset as follows:

  First Level Reset (User Reset)
  The first level reset consists in formatting only the "user files" part of the non volatile memory.
  This type of reset does not modify the communication parameters of the Flexy.
  How to generate a first level reset:

  1. Power the unit OFF and ON again
  2. Immediately press and maintain the reset button. The LED labeled BI1 turns ON
  3. Wait approximately 30 seconds until the USR LED blinks red 1x per second
  4. Immediately release the button. The LED labeled BI1 turns OFF. If the button keeps being
     pressed at this point, the second level reset will be engaged
  5. Wait approximately 30 seconds until the reset procedure is completed.
  6. The Flexy restarts automatically and the unit is ready to be used, the USR LED blinks green
     slowly

  This can be found in the installation guide.

  0

サインインしてコメントを残してください。