Kyle Reynolds
- Activité totale 653
- Dernière activité
- Membre depuis
- Abonné à 0 utilisateur
- Abonnés 3 utilisateurs
- Votes 15
- Abonnements 175
Aperçu des activités
Dernière activité effectuée par Kyle Reynolds-
Kyle Reynolds a ajouté un commentaire,
Excellent - thank you for the update!
-
Kyle Reynolds a ajouté un commentaire,
> Do I need to set up the FTP configuration in the eWon itself? No, you shouldn't need to. The default should be working. > (address, user, password), and should I be using passive or active mode? ...
-
Kyle Reynolds a ajouté un commentaire,
Are you using the 'adm' user? Please make sure to use the 'adm' user and password.
-
Kyle Reynolds a ajouté un commentaire,
You probably overwrote the password hash and will have to reset the password. I would advise a Level 1 reset. How to Perform a Reset Level 1 and Level 2 on an Ewon Device – HMS Support Portal Keep...
-
Kyle Reynolds a ajouté un commentaire,
Can you provide some more details on what you are trying to accomplish? To reach a LAN device from the WAN, you can use NAT 1:1 as shown above or Proxy/Port Forwarding: Use Port Forwarding/Proxy r...
-
Kyle Reynolds a ajouté un commentaire,
The Cosy+ should automatically update for DST as long as you select the correct region in the System Wizard:
-
Kyle Reynolds a ajouté un commentaire,
You can follow this guide to get it working: How to connect to multiple machine LAN networks connected to a single gateway using an Ewon and Talk2m You need a router that will route to the other LA...
-
Kyle Reynolds a ajouté un commentaire,
If you haven't tried it yet, I would recommend the USB drive firmware reflash: How to update the firmware of an Ewon Cosy+ ? But if that doesn't work, you will have to return it.
-
Kyle Reynolds a ajouté un commentaire,
Hi Peter, The default username/password should be adm/adm. Are you sure that the Level 2 reset was successful? Did you follow the instructions here: How to Perform a Reset Level 1 and Level 2 on ...
-
Kyle Reynolds a ajouté un commentaire,
Yes, with Talk2M Pro, you can create a group with limited permissions. See the Pools and Groups section in the Ecatcher help here: Pools Only admins should be able to see all the Ewons.