ALK
- Activité totale 85
- Dernière activité
- Membre depuis
- Abonné à 0 utilisateur
- Abonnés 1 utilisateur
- Votes 0
- Abonnements 56
Aperçu des activités
Dernière activité effectuée par ALK-
ALK a ajouté un commentaire,
Commentaire officiel Hello Christian, I checked internally with our R&D and the AB6690-C adheres to version HTTP/1.1. I hope this information proves to be useful for you. Best regards, HMS Tech Support
-
ALK a ajouté un commentaire,
Commentaire officiel Hi Logan, if look at the 56 pin network connector header of the B40 MD0 is on pin 30 and MI1 on 53. Here's a snip from the B40 HW Design Guide:
-
ALK a ajouté un commentaire,
Commentaire officiel Hello, as I can see, you've opened a support ticket that we are already taking care of.
-
ALK a ajouté un commentaire,
Commentaire officiel Hi edma, Sorry for the late reply. In general, it's not possible to specify or even guarantee wireless signals reaching certain ranges, since it depends on so many factors.Distance certainly affect...
-
ALK a ajouté un commentaire,
Hello Sweta, in my first post, I've tried to explain what the Diagnostic object is good for within the Anybus CompactCom object model and how to create and delete diagnostic events. If you need det...
-
ALK a ajouté un commentaire,
Hello Gary, sorry for the late reply, your request slipped through somehow. Something must have gone wrong with the FW download, since both RUN and ERR LEDs lighting up in red means a FATAL error. ...
-
ALK a ajouté un commentaire,
Commentaire officiel Hello, in order to convert CAN bus to Modbus-TCP, I would recommend the Anybus Communicator CAN for Modbus-TCP, p/n AB7319-B.
-
ALK a ajouté un commentaire,
Commentaire officiel Dear Sweta, in the Anybus CompactCom object model, the Diagnostics Object 0x02 serves the purpose of announcing an event to the network. This may be a malfunctioning device or a value exceeding it...
-
ALK a ajouté un commentaire,
Hello Albert, in the [Connection Manager] section, there is the "Exclusive Owner" connection with this path: "20 04 24 C5 2C 96 2C 64" wherein the 96 and 64 stand for the instance numbers (in hex) ...
-
ALK a ajouté un commentaire,
Hi Albert, for an explicit message I/O data exchange, you'll need to use e.g. the get_attribute_single 0x0E or the set_attribute_single 0x10 services applied periodically to the Assembly Class 04, ...